Documents checklist:
1. Project name with a revision number. (PCBA)
2. Gerber files with panel layout, PCB factory, etc.
3. Preferably with IPC net list for subsequent verification.
4. Specification of the PCB.
5. FABMASTER, ASCII or ODB++ files for the AEGIS production suite.
6. Assembly 3d model file.
7. Wishes Requests for regarding solder paste, cleaning, coating, glue etc.
8. Special instructions for specific components.
9. Bill of Material (BOM) in Excel.
Documents checklist:
1. Project name with a revision number. (PCBA)
2. Gerber files with panel layout, PCB factory, etc.
3. Preferably with IPC net list for subsequent verification.
4. Specification of the PCB.
5. WishesRequests for regarding solder paste, cleaning, coating, glue etc.
6. FABMASTER, ASCII or ODB++ files for the AEGIS production suite.
7. Special instructions for specific components.
8. Bill of Material (BOM) in Excel.
Documents checklist:
1. Project name with a revision number. (PCBA)
2. Gerber files with panel layout, PCB factory, etc.
3. Preferably with IPC net list for subsequent verification.
4. Specification of the PCB.
5. WishesRequests for regarding solder paste, cleaning, coating, glue etc.
6. FABMASTER, ASCII or ODB++ files for the AEGIS production suite.
7. Special instructions for specific components.
8. Bill of Material (BOM) in Excel.
Bill of Material (BOM) in Excel, including:
| BOM revision | Quantity of the relevant component | Reference (R16, U3, X1, etc.) | Component type (resistor, IC, etc.) |
| Type (e.g. ADUC832BRZ) | Value (e.g. 100nF, 100k, etc.) | Specification (%, V, W, ppm, C0G/X7R, Low ESR, 105 ºC | Manufacturer (e.g. Texas Instruments) |
| alternative components | SMD / conventional | full description | Resource Type Style (SMT/TH/MECH) |
| Package size (e.g. 0603 or TO220) | Preferably for micro BGA, QFN, LGA the pitch | When supplied: specify type and size of the reel/ tape/ stick, etc. |